Description

Kidde Carbon Monoxide Detector with Long-Life Lithium Battery, Digital Display, 3 LEDs, Pack of 2 The Kidde Carbon Monoxide Detector with Long-Life Lithium Battery, Digital Display, and 3 LEDs, Pack of 2, model C3010D, features electrochemical sensing technology to help protect you and your family from the dangers of carbon monoxide. Operating on a long-life, sealed lithium battery, the CO alarm provides reliable detection of carbon monoxide, even during power outages. The digital display shows ongoing CO monitoring, updating every 15 seconds to show the level of carbon monoxide in your home. Three LEDs indicate the status of the alarm: a green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present, a red LED will pulse 4 short beeps to indicate CO gas has been detected until the device is reset or the gas is eliminated, and an amber LED will flash every second to signal an error or a low battery. The Peak Level Memory function allows you to see the highest level of CO concentration measured since the alarm was last reset, while the Test/Reset button allows you to test the carbon monoxide alarm to ensure that it's working correctly. For whole home detection, place one carbon monoxide detector on each level of your home and near every bedroom. Package includes two Kidde carbon monoxide detectors. UL Certified with a 10-year limited warranty. Kidde Nighthawk Carbon Monoxide Detector & Propane, Natural, & Explosive Gas Detector, AC-Plug-In with Battery Backup, Digital Display , White The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This unit is an AC powered, plug-in CO and explosive gas alarm that protects you and your family from two deadly threats. The 900-0113 includes 9V battery back up that provides protection during a power outage, when AC only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide, if any. The unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas , methane or propane. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades. The Kidde Nighthawk Carbon Monoxide Detector & Propane, Natural, & Explosive Gas Detector, AC Plug-In with Battery Backup & Digital Display, model 900-0113, is powered by a 120VAC wall outlet with a 9-volt alkaline battery for backup during a power failure. Using electrochemical sensing technology, the combination carbon monoxide alarm & gas detector warns with alarm & digital display. For CO detection, the alarm will sound & the display will report out the levels of carbon monoxide in parts per million (PPM). For explosive gas detection, the alarm will sound and the display will identify "GAS" as present. The digital display will have a red dot in the lower right corner that will blink to indicate normal operation. The Smart Hush feature silences the fire alarm for approximately 8 minutes. UL Certified with a 5-year limited warranty. Meets requirements of UL 2034.

Disclaimer: No disclaimer available.